Hey guys,
As you know i have done a vector of the
Crazy Kong CPO.
Last week i was at a
customer of me, who does plexi / lexan lasercutting.
I asked him if he could make the plexi part that is on the CP, and that was not a problem.
I also asked if he could cut the holes square for the bolts that mounts the plexi to the wood, and he responded;
For me it is no difference if i cut a circle or a square, so that is no problem.I have made a template in Illustrator with the correct sizes and holes that match up with the vector that goes to the printer.
anyway, i asked if the price will be the same if i do for example 5 instead of one, and he told me that he could give a 5€ discount on every panel.
Long story short;
Who is interested in a repro CPO for Crazy Kong ? (or any other zaccaria CPO with the same hole setup)
The price is 40€ per piece and 35€ if i take 5 pieces.
I will post more pictures of my progress later, since i dont have them on my laptop now (still in the camera
)
here is the example which i did for the lexan (the magenta part):
The edges will be routed and buffed so there is no sharp edge anymore.
Note that this is
without the backprinted CPO
Later more on that..
EDIT:People with interest:
Etienne: 1x Crazy Kong, 1x "mini Vanguard"
Blanbek: 1x custom Astrowars, 1x Super Cobra
solidsnake: 1x Crazy Kong
Luigi: 1x Crazy kong
