Author Topic: Hi, new guy here.  (Read 9270 times)

Rorsach

  • Jr. Member
  • *
  • Posts: 48
    • View Profile
Hi, new guy here.
« on: October 02, 2011, 02:27:25 PM »
Got introduced to this forum by Polderarcade, whose nice "little" arcade i visited last week when i picked up his monstrous JAMMA-Cabinet. That cab is my first real-life working arcade cab, but actually already my second cab ever.

A couple of weeks ago, on my way to work, i saw a lonely cab standing outside on someone's driveway. I gave them a call when i had arrived at work (only 5 minutes later) and asked what they were going to do with it. Their answer: take it to the dump. I could have it for free if i was quick about it, so i took one of our forklifts and a pallet and went to pick up the cab.

I think i did good:




It's complete and in very decent state, too bad the game/screen aren't playing ball:



I've been tinkering a bit, cleaning, measuring voltages and reseating the roms, but still no luck. The board has already been frankensteined way back in the '80, with extra spaghetti everywhere on the PCB.

My kids playing Marvel Superheroes Vs STreetfighter on the monstercab in the morning (iPhone pic, bad quality):



This cab is in the process of being MAME'd, i've already got a PC loaded with a couple of emu's and GameEx and the JPAC is on it's way. Now if only i can convince the wife to let me keep this monster in the living room.
« Last Edit: October 02, 2011, 02:36:09 PM by Rorsach »

Etienne MacGyver

  • ArcadeLifeStyler'
  • ***
  • Posts: 7611
  • The Netherlands
    • View Profile
Re: Hi, new guy here.
« Reply #1 on: October 02, 2011, 02:52:31 PM »
Again another dutchie here !

Welcome Rorsach

there is alot of dutchies here , and also alot of other europeans ofcourse

I think this is the best place to hang out, so you did a good thing by becomming a member  ;)

If i recall you live in roosendaal, and by that you live close to me  ;)

You did a good thing to save that Universal cabinet !
i travel alot from and to work, but this has never happened to me yet  :-\

Anyway, its a matter of beeing at the correct place in the correct time i guess   :D

Also there are some guy's out here that are wizards when it comes to PCB's, so maybe they can help you get this back to life


Blanbek

  • Member
  • **
  • Posts: 170
  • From Belgium
    • View Profile
Re: Hi, new guy here.
« Reply #2 on: October 02, 2011, 04:48:05 PM »

Welcome Rorsach!!!  :D

Berny



level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Hi, new guy here.
« Reply #3 on: October 02, 2011, 07:02:29 PM »
You didn't do good...........YOU DID BRILLIANT !!!

You do realize that these kind of "found a cab for free on the curbstone" stories only happen in the US right..??
Totally amazing !!!!! I love the Universal's for their "overdone" artwork and of course the 2nd marquee.

And...welcome aboard !!

ckong

  • ArcadeLifeStyler'
  • ***
  • Posts: 3177
  • The Netherlands
    • View Profile
Re: Hi, new guy here.
« Reply #4 on: October 02, 2011, 07:03:20 PM »
Hi Rorsach, welcome and enjoy your stay here.

Belike

  • ArcadeLifeStyler'
  • ***
  • Posts: 4781
  • Budapest, Hungary
    • View Profile
Re: Hi, new guy here.
« Reply #5 on: October 02, 2011, 07:05:07 PM »
Welcome here! ;)
Yes, Etienne is right, you should try to repair the pcb or find a replacement before slaughtering it to mame. :twisted:
Here is an expensive one, maybe you can get some discounts there ;)
http://www.arcadiabay.de/source/item.aspx?id=2819
« Last Edit: October 02, 2011, 07:08:32 PM by Belike »

DarthNuno

  • Administrator
  • ArcadeLifeStyler'
  • *****
  • Posts: 11750
  • Singe's castle
    • View Profile
    • Dragon's Lair Fans / Arcade LifeStyle
Re: Hi, new guy here.
« Reply #6 on: October 02, 2011, 07:13:52 PM »
Welcome to this board Rorsach  :)

Wow, the artworks on that cab look awesome  :o ... and they are everywhere : side, front, bezel... devil!  :twisted:
If you mame it, don't forget the main word : reversible  ;)

Good work on that one  ;)

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Hi, new guy here.
« Reply #7 on: October 02, 2011, 07:38:16 PM »
Read again guys, he says he will be mameing the monster cab not the CA.

The CA seems to simply have a sync issue on the monitor...could be as easy as adjusting a pot...
« Last Edit: October 02, 2011, 07:40:13 PM by Level42 »

Rorsach

  • Jr. Member
  • *
  • Posts: 48
    • View Profile
Re: Hi, new guy here.
« Reply #8 on: October 02, 2011, 07:50:48 PM »
No way i'm raping the Cosmic Alien. First thing is making an adapter to test the gameboard in the JAMMA cab, then i'll know if the PCB is toast or the monitor, the fingerboard is on it's way and the soldering iron is hot.

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Hi, new guy here.
« Reply #9 on: October 02, 2011, 09:10:59 PM »
Hah, you maybe new here, but definitely no newbie ;)

Rorsach

  • Jr. Member
  • *
  • Posts: 48
    • View Profile
Re: Hi, new guy here.
« Reply #10 on: October 02, 2011, 09:31:29 PM »
Actually, i'm a complete newbie who knows how to study hard (if only i had studied this hard when i was in school ;().

The last couple of weeks have been a crash-course in electronics and arcade cab restauration, i never even knew how to handle a multimeter and now i'm building a DIY video probe and i'm waiting on a logic probe to arrive.

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Hi, new guy here.
« Reply #11 on: October 02, 2011, 09:57:05 PM »
Amen !

Etienne MacGyver

  • ArcadeLifeStyler'
  • ***
  • Posts: 7611
  • The Netherlands
    • View Profile
Re: Hi, new guy here.
« Reply #12 on: October 03, 2011, 07:19:18 AM »
sounds like we got another macgyver here  ;)

Muerto

  • ArcadeLifeStyler'
  • ***
  • Posts: 3860
  • Denmark
    • View Profile
Re: Hi, new guy here.
« Reply #13 on: October 04, 2011, 12:03:45 AM »
Welcome here!!! :spaceace:

ckong

  • ArcadeLifeStyler'
  • ***
  • Posts: 3177
  • The Netherlands
    • View Profile
Re: Hi, new guy here.
« Reply #14 on: October 04, 2011, 07:27:18 AM »
..... now i'm building a DIY video probe ....

more info, please.