Found Hantarex 900 (NOT 900E) HVT's (Flybacks) BUT.....

[level42]

...they cost at least double the price of a new Chinese chassis for your tube....

I got a price of €216,90 and no it's not for 10 of them but EACH. AND it is excluding 21% VAT in Ireland.


I say for that price.....forget them. Either find a cheap Chinese brand new chassis or find new complete monitors for that price !

Anyway, here is the source:
http://www.donberg.ie/descript/h/hr_6051.htm

Maybe some Chinese manufacturers can copy them for a lot cheaper ?

[Belike]

I wrote a letter to HR Spain yesterday, if they can reproduce a bigger quantity from these, fingers crossed.

[level42]

I wrote a letter to HR Spain yesterday, if they can reproduce a bigger quantity from these, fingers crossed.

I e-mailed a Chinese manufacturer

[Belike]

Matteo, can you ask the italian distributor?
We started a serious chase for the MTC900 flyback.

[hatster]

I wrote a letter to HR Spain yesterday, if they can reproduce a bigger quantity from these, fingers crossed.

IF you need help with the company in Spain let me know as I live here in Andalucia !

cheers,

[PaulSwan]

It'd be nice if HR could do a run of them.

[baritonomarchetto]

I have emailed HR Diemen at least 10 times with no answers in the last 2 years... i had the luck to find an old online shop that had a couple of those month ago: they had a couple in stock but no more.

Anyhow, if you are lucky enought to convince HR Diemen to produce that fly again, be sure to buy the cup, also: it's a separate/optional item!!!

[italiandoh]

Matteo, can you ask the italian distributor?
We started a serious chase for the MTC900 flyback.

I have to check what is the HR replacement part number, then I will e-mail my italian contact again.
How many are we going to order then, more or less?

Matteo

EDIT: or if someone else wants to pick this up, here's the direct contact. Feel free to e-mail them. You'll have to write them an e-mail explaining what you need in detail providing with the HR specific reference as it will be a special part not in stock. You will be asked to pay all in advance.

[level42]

I have to check what is the HR replacement part number,

HR 6051

We need the HV leads even more than the HVTs themselves I guess. Most problems are with the cup...

[Belike]

I guess we can take at least 30 pieces.
I tried to use that direct link, but it is in italian and couldn't change to english.
I guess they would be more familiar with an italian guy tho.

[eurotronic]

I found an online shop that still have some HR6051.
37Eur.

http://www.electronique-diffusion.fr/product_info.php?products_id=51858

[Belike]

I found an online shop that still have some HR6051.
37Eur.

http://www.electronique-diffusion.fr/product_info.php?products_id=51858

Thanks for the link, can you ask them if they also have the cable and the cup for it?
My french is not too good these days.

[eurotronic]

Just to be sure,
is this the cup?

[eurotronic]

Ok i reply to myself.
here is a THT HR6064 with cable and cup "on the picture" and the descritpion say that is the same then 6051.
The price is a little lower too, 29eur.
http://www.electronique-diffusion.fr/product_info.php?products_id=67993

Apparently:HR 6051 = HR 6064 = FAT 3771

[level42]

Hah, he's going to get a lot of orders !!

Yes that is the cup.

The thing is, normally HVT's come complete with the HV wire and cup attached.
But this one comes without it. There is a HV connector on the HVT itself.

In theory, if the HVT is bad and you want to replace it, you remove the HV wire from that connector by turning it loose and pulling out the wire and then you put it back into the new HVT.

However I guess why people want a new lead is because of the clear plastic cups that get very hard and sometimes even crumbly over time, and thus loosing their proper function.