Zaccaria Fitter

[Belike]

Following this topic, I started to clean the cab inside and found an interesting warning on the psu

Originally, the plan was to use a Qusar cabinet from my first roadtrip for this project, but this beauty was made in a Space Station cab, so there was no more doubt.
My Old Friend made something with the psu and the voltage dropped to +12V, fortunately we don't need the -5V here.
And finally I have a FIIIIIIIIIIITTTTTTTTTTTTTTTTTTTEEEEEEEEEEEEEEEEEEEERRRRRRRRRRRRRRRR!!!!!!!!!!

[Belike]

It was a double luck to find this cab with this cpo, cause my Starspalsh cab don't have any and we also have the scan from the Fitter cpo (thanks to Paul ), which is the small one, so it will perfectly fit to this cp, won't have to "erase" screw holes.

The cab is fully working, just have to print a vertical cardboard bezel, it has the horizontal one atm..


Ah, and before you ask, as far as I know, original italian Fitter cabs did not have dedicated sidearts, only the licensed AVG ones later.

[Etienne MacGyver]

Thats Great Bela !

i was about to warn you about the PSU when i read 15 Volts  

Its good to have your old friend around

Any more pics of him ? what an epic man is that  

[Belike]

Its good to have your old friend around

Any more pics of him ? what an epic man is that  

Atm. I don't have new pics from him, but next week we will meet at the Night Of Pinballs 2012, I will try to make some.

[Superully]

fabulous, bela, another zacc cab for your collection. how many are you missing now? must be getting close to having all of them, right?

[PaulSwan]

Cool! Yes, you need to make a matching CPO of course
Paul.

[level42]

 

[Belike]

fabulous, bela, another zacc cab for your collection. how many are you missing now? must be getting close to having all of them, right?

It would be nice, but I'm only somwhere around half way.
The missing ones are Frogger, Tron, Puckman, Laser Battle, Moon Crest, Astro Wars, Galaxia, Jack Rabbit, Money Money, Eyes and the coolest one Shooting Gallery, but I'm afarid there is no more exists from that one.

[Belike]

[PaulSwan]

BTW, should the monitor surround be a plain black one rather than a space one for Fitter? My dedicated is missing the surround, but other none-space cabs of this era had plain black surrounds (e.g. Frogger).

One complete Shooting Gallery is rumored to exist in a collectors hands, but has been off the radar for a number of years.

Regards,
Paul.

[Belike]

BTW, should the monitor surround be a plain black one rather than a space one for Fitter? My dedicated is missing the surround, but other none-space cabs of this era had plain black surrounds (e.g. Frogger).

One complete Shooting Gallery is rumored to exist in a collectors hands, but has been off the radar for a number of years.

Regards,
Paul.

Hmmm., you must be right, the milky way wouldn't match for this game.
Thanks for the tip.
Btw. I would swap a Star Wars for that Shooting Gallery, I hope the owner will spot this post.

[Digimon]

I've got a Fitter UR6 Cab yesterday;)

Does someone know if a scannend Bezel is available?


Greetings
Digi

[Belike]

I think, Thoresten (not Luigi) in Germany has some NOS bezel for this one.