Dragon's Lair Fans - Arcade Lifestyle
General Chat => Technical Area => Topic started by: rogerxy on June 06, 2017, 06:25:04 PM
-
I bought a Defender some time ago which was a DOA.
I have recapped all cards which made the G07 monitor alive again but still nothing on the screen. (I got video on the screen when I tried with another game so I know the monitor is working)
I've done som work with the PCB:s as well:
- Changed to a switched power supply (from arcadeshop), just to get the regular PS out of the equation
- Changed the ROM Board Ribbon Cable (to the one from arcadeshop)
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175418.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175418.jpg.html)
- Changed the 4116 RAMs to 4164, as well as the 4164 adapter from arcadeshop
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175433.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175433.jpg.html)(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175427.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175427.jpg.html)
- Checked all ROM:s (all are OK)
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175400.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175400.jpg.html)
Despite this, the problem is the same as it was before I did all of the above :(
I get raster on my monitor, but it shows nothing. The 4 LEDs on the ROM board are fully lit (no blinking) from the second I start the game.
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175340.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175340.jpg.html)(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175354.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175354.jpg.html)
+5V, -5V and 12V all seem to be ok
------------------------------------------------------------------
So, my question is, could anyone help me where I continue my trouble shooting. I am unfortunately stuck as of now :(
Thank you very much in advance
-
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175408.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175408.jpg.html)
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175413.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175413.jpg.html)
(http://i66.photobucket.com/albums/h270/wargames00/th_20170606_175423.jpg) (http://s66.photobucket.com/user/wargames00/media/20170606_175423.jpg.html)
-
Have you any means of checking the signals on the boards? I think the CPU doesn't start. That's why the test LED's don't blink.
First I would check the clock signals (pg12) and the reset circuit (pg9) the manual can be found on the KLOV http://www.klov.net/manuals-videogames/D/Defender.pdf (http://www.klov.net/manuals-videogames/D/Defender.pdf)
-
I have a logic probe. I'm not that familiar with but I will give it a try, thank you for your advice, I will get back with my results :)
-
The clock generator crystal gives PULSE on one leg and LOW on the other leg, so I guess that works
Do you mean the CPU on the main board or the ROM board? I've found pulse on both of them but not sure exactly where I shall look though :(
-
Has been a while since I had a defender on the bench, does it have a CPU on the ROM board?
Anyhow start with the main CPU on the main board. The MC6809 located at 2I. Here is the datasheet:
http://www.gbgmv.se/dl/doc/md09/MC6809_DataSheet.pdf (http://www.gbgmv.se/dl/doc/md09/MC6809_DataSheet.pdf)
Look for activity at the address and data pins.
On the other hand, what game did you use to check the monitor?