Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: Ramakers on September 06, 2015, 02:29:46 PM

Title: Taito Zunzun Block Pinout
Post by: Ramakers on September 06, 2015, 02:29:46 PM

pinout as tested on working board

G connector
                 -----------
          +5V |  A | 1  | +5v
          +5V |  B | 2  | +5v
          +5V |  C | 3  | +5v
          +5V |  D | 4  | +5v
                 |  E | 5  |
2P pot input |  F | 6  | 1P pot input
      2P serv |  H | 7  | 1P serv
           KEY |  J | 8  | KEY
         Coin2 |  K | 9  | Coin 1
     2p Start |  L | 10 | 1P Start
                 |  M | 11 |
                 |  N | 12 |
                 |  P | 13 | 
                 |  R | 14 | Composite Video
                 |  S | 15 |
          GND |  T | 16 | GND
          GND |  U | 17 | GND
          GND |  V | 18 | GND
                 -----------
Use 5k potentiometer between GND and +5v, connect wiper to pin 6 or F
2P controles only used in coctail mode. (put big switch 3 on)

N connector (BOTH SIDES EQUAL)
         ------
         |  1 | GND
         |  2 | GND
         |  3 | GND
         |  4 | GND
         |  5 | AUDIO+
         |  6 |
         |  7 | GND
         |  8 | GND
         |  9 | GND
         | 10 | GND
         | 11 | KEY
         | 12 |
         | 13 | +12V
         | 14 | +12V
         | 15 | +5V
         | 16 | +5V
         | 17 | +5V
         | 18 | +5V
         ------
Use GND as AUDIO-

Title: Re: Taito Zunzun Block Pinout
Post by: Luigi on September 06, 2015, 04:45:28 PM

hm, this game is from 1979 (according to KLOV) and pretty similar to Breakout, which was released in 1976....3 years before. Is the gameplay of Zun Zun Block very much different to be successful 3 years after Breakout?

Title: Re: Taito Zunzun Block Pinout
Post by: lesoleil70 on September 06, 2015, 08:16:24 PM

Here's a vid of it being played.
https://www.youtube.com/watch?v=k1PNdUgVP_U (https://www.youtube.com/watch?v=k1PNdUgVP_U)