Dragon's Lair Fans - Arcade Lifestyle

General Chat => Dragon's Lair / Space Ace => Topic started by: sindri on July 30, 2013, 10:35:09 PM

Title: dragons lair 2 machine
Post by: sindri on July 30, 2013, 10:35:09 PM
hi
i need some help

i have a dragons lair 2 arcade
the laserdisc player is broken
i need know wich laserdisc player i need to buy for play again

can i use sony ldp 3300p in my european machine?
my old player was philips 380d

where can i buy some other laserdisc player ?
i think that sony ldp3600 is compatible but i dont find any one


help me please
Title: Re: dragons lair 2 machine
Post by: Sonic 1992 on July 31, 2013, 06:01:36 AM
Maybe check with Jason Finn aka Finny... He may still have some, he had a lot of spares.. Maybe he will part with one for you?   No luck on the 'bay?
Title: Re: dragons lair 2 machine
Post by: sindri on July 31, 2013, 12:19:44 PM
Wow!!
Thanks a lot for your response
can someone give me mail address  for contact whith him?
I need see again my dragons lair alive

on ebay nothing

someone givesme a sony 3300 p but i dont know if it will work on my
euro dragons lair 2

Inside was a philips 380
now broken
Title: Re: dragons lair 2 machine
Post by: Sonic 1992 on July 31, 2013, 05:23:45 PM
PM him here on the DLF forums....   :D
Title: Re: dragons lair 2 machine
Post by: italiandoh on July 31, 2013, 08:50:54 PM
The DL2 disc is NTSC only, so any PAL laserdisc player like Sony LDP-3300P (P stands for PAL) will not even be able to play the disc.
You need another Philips VP380.
Or you can use a Sony LDP-1450 or LDP-3600D but you will need to change the game EPROM and install a NTSC to RGB card to display the player composite output on the arcade monitor.
Good luck,

Matteo
Title: Re: dragons lair 2 machine
Post by: sindri on August 02, 2013, 06:24:26 PM
ok
i sent a message to finny but dont say nothing
someone can give me right adress please?

a have a question

can i play laserdiscs on the laserdiscs players of dragons lair 2 in my case?
if i fix my dragons lair 2 laserdisc player philips 380 can i watch films?

perhaps i try to repair the philips 380 player
but i need some laser disc for see that it works or not

please,someone expert that gives me some light

thanks a lot
Title: Re: dragons lair 2 machine
Post by: Etienne MacGyver on August 02, 2013, 07:12:02 PM
i think there is a video out on the player, and you have a DL2 disk so that should play i think ?
Title: Re: dragons lair 2 machine
Post by: sindri on August 02, 2013, 07:54:08 PM
i dont know because never did it before

someone who know it?
Title: Re: dragons lair 2 machine
Post by: italiandoh on August 03, 2013, 12:25:57 PM
ok
i sent a message to finny but dont say nothing
someone can give me right adress please?

No. If Finny wanted to give away his address, he would have published it himself. Use the forum private message service and patiently wait, or try something else.

can i play laserdiscs on the laserdiscs players of dragons lair 2 in my case?

Yes, but without remote control you only have the options to play and stop using the buttons on the front panel of the device.

if i fix my dragons lair 2 laserdisc player philips 380 can i watch films?

Of course, but keep in mind you will only be able to play NTSC discs unless your player is a real Philips VP380 which is dual standard PAL/NTSC. Most of the VP380 used in DL2 machines were hacked to be NTSC only to save costs.
Good luck,

Matteo


Title: Re: dragons lair 2 machine
Post by: sindri on August 03, 2013, 08:33:54 PM
thanks a lot

i need to speak with finny
i need some lucky

please finny see the post
Title: Re: dragons lair 2 machine
Post by: sindri on December 11, 2013, 04:27:26 PM
hi all the people
i found a sony ldp 1450 laserdisc player

can i put it into my dragons lair 2 cabinet with no problems?
i need something?

can i found some laser lens for replace the sony old lens?
the laserdisc i found read sometimes good
sometimes it doesnt work fine

thanks
Title: Re: dragons lair 2 machine
Post by: italiandoh on December 11, 2013, 09:54:58 PM
Have a good read -> here (http://www.dragons-lair-project.com/tech/pages/dl2.asp)

Matteo