Dragon's Lair Fans - Arcade Lifestyle

General Chat => Arcade Lifestyle => Topic started by: bencao74 on February 11, 2013, 09:41:48 AM

Title: Supergun MAK Strike Project
Post by: bencao74 on February 11, 2013, 09:41:48 AM

Hey,

 perhaps some people arond here knows that I`m doing my Supergun MAK Strike Project. It started two years ago and a simple to use Supergun MAK PCB. This was the first version.

(http://3.bp.blogspot.com/_YLXgzxS8cEc/TSijgJfgqYI/AAAAAAAACbk/4ODp55Am_ZE/s320/IMG_0813.JPG)

First there was a transparent enclosure
(http://1.bp.blogspot.com/_YLXgzxS8cEc/TUf2mXh6oII/AAAAAAAACdA/VCj_ziCrt2k/s320/2011-02-01_11-52-51_668_Bremen.jpg)

Then there was a black enclosure
(http://2.bp.blogspot.com/-j8lRjqS9Qk8/TfneDYzFLiI/AAAAAAAACsI/ACLKzZ4200U/s320/IMG_1138.JPG)
(http://3.bp.blogspot.com/-j4S-rrxb81s/ToL3yl0McUI/AAAAAAAAC-8/EsdR95SgYHs/s200/IMG_1400.JPG) with engraving

Last enclosure was aluminium one with etienne stickers.
(http://4.bp.blogspot.com/-NZWcesd1_OU/T0YxdbtahxI/AAAAAAAADoQ/HqB2peHCojw/s320/IMG_0272.JPG)

After collecting some idea I`ve made then version 2 of this supergun.

(http://3.bp.blogspot.com/-NEJr5B2j5j0/UIlbTzcr3fI/AAAAAAAAEtM/T-C0AGOkIi0/s320/Shop+264.jpg)
First enclosure was again transparent
(http://2.bp.blogspot.com/-6vcprk9CK1E/UKoCuAHfKZI/AAAAAAAAEyc/wr_BDj0w97A/s320/IMG_0147.JPG)

I think the evolution of this work is visible. Now I`m going to face another challenge :)

(http://4.bp.blogspot.com/-rC6ZQgJd0j0/URgDSaWKinI/AAAAAAAAFSE/48fdxmvF02E/s320/IMG_0001.JPG)

My aim is a new enclosure made from noble metal, sturdy, robust, complete closed with PSU and all that stuff. I`ve focused here on the enclosure work. Feel free to ask if happen to have questions about the electronics or interfaces.

Cheers

Title: Re: Supergun MAK Strike Project
Post by: ataritoobin on February 11, 2013, 04:00:38 PM

Wow, very clean.  I like it  :)!

Title: Re: Supergun MAK Strike Project
Post by: Etienne MacGyver on February 11, 2013, 06:53:00 PM

Nice Jamma Labels  :D ;)

Title: Re: Supergun MAK Strike Project
Post by: bencao74 on February 13, 2013, 07:15:35 PM

indeed, perhaps I use them on this one, too..

(http://2.bp.blogspot.com/-NLa2td127c0/URvWMajKJ_I/AAAAAAAAFTQ/I5geXJVD7_8/s320/IMG_0012.JPG)

Goto my blog for more pics
http://bencao74.blogspot.de/2013/02/supergun-mak-strike-enclosure-mockup.html

 this is the mockup for my new supergun mak strike enclosure. There are some things to improve left. Anyway, I think this is a good starter.

Features:
- complete noble metal
- Switches for Test, Service, Power and Mono / Stereo Select
- Huge Buttons Coin and Starts
- Voltage Display
- Two fan cuts
- Scart RGB
- PSU plug cut
- Holes for potentiometer knob adjusting RGB level and voltage 5V
- jamma connector

PSU will be built-in.

Comments are welcome.