Dragon's Lair Fans - Arcade Lifestyle
General Chat => 'Business' Area : Buy/Sell/Trade => Topic started by: NES4Life on June 08, 2012, 09:38:00 AM
-
Hey all,
It didn't take me too long to realise that I'm too much of a beginner to care for my Hangly-Man PCB properly.
Really I need a JAMMA Kit with big pictures and short words.
I'm not sure what a Hangly-Man PCB goes for - I know KLOV.com lists it as very rare but I'm not looking for silly eBay prices. :pac: :ghost: :ghost: :ghost: :ghost:
Please PM me with any offers - if you'd like to trade instead then I'm looking for a complete JAMMA kit ( harness, PCB, controls, instructions - perhaps a 60-in-1 type thing.)
I'm a complete novice so am not sure how to tinker with it. Currently, the PCB fires up and runs but I don't hear sound (I've tried hooking up the speaker in a number of ways and have decided to buy a new speaker), Pacman continues to go right, and I can only make him go left. P1 and P2 buttons are working, as is the service pin, and coin 1 pin. Someone has soldered the 'Table' pin to 'GND' so it's currently in table mode - I'm sure this can be de-soldered. Like I said, I'm sure all the above defects are just due to bad wiring by the previous owner.
Looking forward to any offers :D - This is NOT going on eBay unless I get 0 offers. I'll add a photo when I next get near a PC - if you have any questions then please just ask.
-
From your restoration thread
If you decide to JAMMA the cab and want to sell the Hangly Man PCB, please PM me ::)
you know whom to pm ;)
-
PM'd and sold.
;D
-
2 minutes ago the PCB was exchanged for £££ as Sevenoaks Station - must have looked like something else than a Hangly Man PCB in a cardboard box changing hands!! ;D ;D
Also great to meet a fellow collector, looking forward to see how nice your cabs going to be!
Thanks again!
Michael
-EDIT-
And here it is:
Top PCB
(https://dl.dropbox.com/u/4093732/Hangly2.jpg)
Buttom PCB
(https://dl.dropbox.com/u/4093732/Hangly1.jpg)
-
Dodgy cash exchanges outside train stations with unmarked boxes and large electronics... this IS an exciting hobby! 8)
Nice to see the PCB laid out - don't forget to unsolder the 'Table' pin from ground ;)
Let us know when you get it hooked up.
-
As Im going to Denmark next month, I will try my best to get it in the cab, but i must say, thats not the first priority though, I think painting + moving is at the top of the list ;) ;D