Dragon's Lair Fans - Arcade Lifestyle

General Chat => Artwork => Topic started by: Dexter on April 07, 2008, 11:49:25 PM

Title: Zaxxon - Artwork ATTN: Bruno
Post by: Dexter on April 07, 2008, 11:49:25 PM

Bruno,

I remember seeing that you were after some Zaxxon sideart, here is the flyer edited and made larger (40 inch height) by me. Unsure if it's what you want ?

(http://i287.photobucket.com/albums/ll124/Atari_Fan/zaxxon_sideart.jpg)

If this is something you want, I can e-mail you the full sized file (suited for printing)

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: DarthNuno on April 08, 2008, 08:25:34 PM

Hi Dexter,

I've just done a picture of my Zaxxon :

(https://www.dragonslairfans.com/zaxxon/zaxside.jpg)

The picture you show is coming from the Zaxxon flyer.

As far as I know... there's no sideart scan or repro available yet  :'( :'( :'(

Thanks for your help anyway  :-*

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: Dexter on April 08, 2008, 11:32:22 PM

Hey Bruno,

Can you e-mail me a larger size of that photo you took ? I'll be able to work with it for you  :)

You still have me e-mail address ?

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: amadama on April 16, 2008, 10:15:53 PM

If you guys get together on fixing this up I can print out full size ones and send to you guys for next to nothing (mostly just shipping costs).

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: Dexter on April 16, 2008, 10:23:23 PM

I am still waiting for Bruno to send me a higher quality picture  8)

What sort of printer do you use and what type of material would you print it on ?

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: DarthNuno on April 16, 2008, 10:28:23 PM

Ok but I would try to do something better than a high quality picture  ;) I'll try to scan the side art... I hope I'll have some time next WE  :?
If I can't... I'll send you better high/res pictures  :P
Arggg... I can't wait to see a new Zaxxon side art  :P  :-*

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: Dexter on April 16, 2008, 10:47:30 PM

Well I want to turn it into a vector and put it on lacalarcade.com (if that's ok with you)

I've been re-touching a lot of art work of late, be good to see some old stuff back out in the wild. I am gonna do my Cobra Command too. I just wish I could get hold of some Esh and Interstellar art work.

Title: Re: Zaxxon - Artwork ATTN: Bruno
Post by: amadama on April 17, 2008, 03:10:17 AM

I have an HP Z3100 44" wide printer. I can print on either adhesive vinyl or adhesive polypropylene.
The only thing is you would have to cut it (I don't have a die cutter).