Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: dimmu--borgir on April 21, 2012, 06:36:07 PM

Title: Help with capacitors on Ultimarc A-pac
Post by: dimmu--borgir on April 21, 2012, 06:36:07 PM

Ok. Been trying to mameify a borrowed Outrun. Have a A-pac v1.1. No problem connecting the pots to the pedals but when I try to calibrate the steering wheel the haircross in windows goes bezerk. Cannnot really explain what happens but when I searched the net I saw something about the capacitors that followed. And that is probably the problem. The thing is, where on earth should I put these caps? On the A-pac? On the pot? I know which capacitor to use with my 5K pots.

Sorry for being stupid! Yes, I have mailed Andy on Ultimarc but guess he will not answer until Monday. Need answers yesterday!!!  ;D

Thanks

Title: Re: Help with capacitors on Ultimarc A-pac
Post by: DarthNuno on April 22, 2012, 07:57:23 AM

Here's a picture I've done when I tested it ... successfully  ;)  :arrow:

(https://www.dragonslairfans.com/sega/toa1.jpg)

Hope this can help you.

Title: Re: Help with capacitors on Ultimarc A-pac
Post by: dimmu--borgir on April 22, 2012, 03:10:54 PM

Bruno, my man. Fully working. Can't thank you enough. Weird.that the manual that followed doesnt mention a word how to connect.

Title: Re: Help with capacitors on Ultimarc A-pac
Post by: DarthNuno on April 22, 2012, 03:12:21 PM

You're welcome  ;)