Dragon's Lair Fans - Arcade Lifestyle
General Chat => Arcade Lifestyle => Topic started by: Robinholland on November 06, 2011, 08:01:27 PM
-
Have someone a picture of the insite of a zaccaria vanguard for the mounting
of the powersupply and the game pcb ?
-
At the moment I have these 2 pics, the psu was mounted to the bottom of the cab with 2 wooden "sticks" in all zaccs, the Vanguard pcb is on the left side on your pic, it is on an aluminium plate, screwed to the side panel.
I can send you better pics tomorrow.
(https://lh3.googleusercontent.com/-5YOGnlfCYtY/TXY7F-Y5-kI/AAAAAAAAEGs/MVGU4ZdO4PE/s800/Arcade%252520day%252520041.jpg)
(https://lh5.googleusercontent.com/-wLG59AuiEto/TfkCJnRNVcI/AAAAAAAAD1I/w9iZhh00jo0/s800/Zaccaria%252520fan.jpg)
-
If you have original pics of your vanguard that wood be nice
I will transport my power supply pcb from my crazy kong jr to my vanguard
Bud i will do it exacly as a original vanguard looks like
I have also a aluminium plate for my vanguard for the pcb bud i will see how it is mounted
It must be factory original :D
-
Here we go, unfortunately mine don't have that metal plate ( I have some spare, but didn't attached).
(https://lh3.googleusercontent.com/-EaKA8Zl0I9s/TrfceevWTKI/AAAAAAAAE9Y/1O_Qoj-B8GE/s800/Vanguard%252520inside%252520006.jpg)
(https://lh5.googleusercontent.com/-DHGmPUL4uj0/Trfcb6WitKI/AAAAAAAAE80/_CQ21hgtSNA/s800/Vanguard%252520inside%252520001.jpg)
(https://lh5.googleusercontent.com/-q8uTYBSE6JM/Trfcbxd286I/AAAAAAAAE84/VLyjCTON9vU/s800/Vanguard%252520inside%252520002.jpg)
(https://lh4.googleusercontent.com/-9HOU9aliXRg/TrfcddgnZiI/AAAAAAAAE9I/9sMJBGTIum4/s800/Vanguard%252520inside%252520003.jpg)
(https://lh6.googleusercontent.com/-1PJrCOIaiqk/TrfceJEG0UI/AAAAAAAAE9Q/Mhxks3GJlCY/s800/Vanguard%252520inside%252520004.jpg)
(https://lh4.googleusercontent.com/-qYjbrkiUOSc/TrfcceX7nGI/AAAAAAAAE88/yYTsIIVbOK8/s800/Vanguard%252520inside%252520011.jpg)
(https://lh5.googleusercontent.com/-a23QypweLk0/Trfce3zmnoI/AAAAAAAAE9c/dSsK0Ysa0m8/s800/Vanguard%252520inside%252520010.jpg)
-
And the metal "board-holderplate" is attached to this part :
(http://www.opdenkelder.com/pics/zaccinside.jpg)
that is grounded.. ;)
-
Thanks Belika !! ;D
-
Power supply is factory original now :D
-
Looks great! :D
Do you have the original Vanguard connector in your cab?
-
pcb and monitor are mounted :)
No i don't have the original connetor belika :-\
-
VANGUARD 8)
-
Now only a cardboard bezel and your finised !
Cool !!! :spaceace: :spaceace: :spaceace:
ps, can i scan that sideart someday ?
(need the shape to create CK and Fitter artwork for Belike)
and what happened to the stick and buttons ? are they taking a bath at the moment ? ;D
-
Starting to look like a Vanguard. ;D
-
The cardboard bezel , buttons and stick are in restoration at the moment :D
Of course you can scan the siteart someday , bud if you make any scratching i will kill you ;D
-
(http://media.ebaumsworld.com/mediaFiles/picture/727702/80656102.jpg) (http://www.youtube.com/watch?v=qfResyFrqlM)
clickpic.
-
Very nice !!!
-
Very nice !!!
Robin, the Vanguard, Etienne or the skull? ;D
-
CPO restored :P
removed sig burn then polishing , looks brand new :-*
-
extremely psychedelic, but totally cool! love the game as well :-*
-
did you flame polished it or just with polishing liquid ?
It looks great!
Will like to scan that too, together with the sideart ;)
-
Beautiful! :D
What did you use for removing cigs?
-
What did you use for removing cigs?
most likely this little tool here :arrow:
(http://img35.imageshack.us/img35/9392/11111494.jpg)
;D
-
Looks mint again, i like this zacc a lot!
Beautiful! :D
What did you use for removing cigs?
yes, please explain.
-
On a side note:
Is there any one knows what the speech actually is saying? I mean, I always tried to focus on the speech in this game but never understand what it is saying.
-
In the beginning it is "Bon Voyage", then "Rainbow Zone", "Stick Zone" and at the end it is "Congratulations".
There is also "be careful" at the end of each "energized zone".
There is only one word that I can't understand, when you "energize" yourself with that strip, it says "......... attack". ???
-
Ok i tell you a secret :D
Sand the cpo smooth with fine sanding paper
Mount it on a plank and polishing it smooth
-
Okay, nice results with a buffingwheel !
I have seen guy's doing flame polishing after sanding with very fine grid (waterproof sandpaper) and polish a bit before hitting it with the torch
http://www.youtube.com/watch?v=Vx7MHdWXQvc&feature=related (http://www.youtube.com/watch?v=Vx7MHdWXQvc&feature=related)
I think i will test this on a piece of scrap plexi soon :P
-
Cool! What grid sanding paper do you use?
-
Hehe, looks like someone got through the filter :D :D :D
-
Nice restoration :) Don't forget everyone - if you take apart a Zac CP or remove the cardboard surround, please scan it in ;D
Paul.
-
Cool! What grid sanding paper do you use?
I use waterproof grain 400 (from the gamma :D )
-
thanks robin! I'll get some for my dk bezel
-
Cool! What grid sanding paper do you use?
I use waterproof grain 400 (from the gamma :D )
Did you use any liquid with the sanding paper?
-
no dry sanding
-
no dry sanding
Cool, thanks Robin. ;)
-
Look out of the police if the nok on your door :D :wink:
Dont try this at home
-
lol! ;D
-
;D ;D ;D
-
CPO restored :P
removed sig burn then polishing , looks brand new :-*
I want to restore the CPO of Moon crest and Vanguard this weekend. Robin, the Vanguard CPO is not really flat, it has a curve because of the heat of cigarettes. I guess that I first have to flatten it before sanding them. What is the best way to flatten them? A heat gun (hair dryer) and sandwhich the CPO between to pieces of wood?
And what type of polishing disc is best to use on a simple drill? (boormachine)
-
CPO restored :P
removed sig burn then polishing , looks brand new :-*
I want to restore the CPO of Moon crest and Vanguard this weekend. Robin, the Vanguard CPO is not really flat, it has a curve because of the heat of cigarettes. I guess that I first have to flatten it before sanding them. What is the best way to flatten them? A heat gun (hair dryer) and sandwhich the CPO between to pieces of wood?
And what type of polishing disc is best to use on a simple drill? (boormachine)
Don't use wood... Not flat enough. Best is in an oven between to pieces of 8 mm safety glass. You Do it at own risk... ;DThere is a thin line between flat and kaasfondue. Melting punt is around 160 degree celsius... Just using a flat metal baking plate might work..... Start first with an old piece of cpo...
-
I want a video of the process !!!!!
-
NO NOT IN THE OVEN ! >:(
I do it with a heatgun , But do it very careful
I pm you !
-
NO NOT IN THE OVEN ! >:(
I do it with a heatgun , But do it very careful
I pm you !
Thanks, I understand it now.
-
NO NOT IN THE OVEN ! >:(
I do it with a heatgun , But do it very careful
I pm you !
Thanks, I understand it now.
Why not in the oven? I works for pinball plastics.
-
Is a ctp a pinball plastic ?
why put it in the oven when my trick does the the job
-
Cut it in half and try both methods....we must know the difference !
;D
-
Just trying to help ;)
Is a ctp a pinball plastic ?
why put it in the oven when my trick does the the job
-
Cut it in half and try both methods....we must know the difference !
;D
Will do that. And I will buy a film camera to film it. But My wife will not let me use 'her' oven, so I decided to buy a microwave, put it on maximum power for 15 minutes. That should do the job.
-
Microwave will not work ;)
-
Cut it in half and try both methods....we must know the difference !
;D
Will do that. And I will buy a film camera to film it. But My wife will not let me use 'her' oven, so I decided to buy a microwave, put it on maximum power for 15 minutes. That should do the job.
On you tube i have seen people using the koekepan.... ;D give that a try.
-
LOL
-
But My wife will not let me use 'her' oven, ...
Dude......you SO want to change that wording there.....this has a rather different meaning in English than it has in Dutch.....
-
;D
But My wife will not let me use 'her' oven, ...
Dude......you SO want to change that wording there.....this has a rather different meaning in English than it has in Dutch.....