Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: Belike on July 15, 2010, 09:10:12 AM

Title: Mortal Kombat sound issues
Post by: Belike on July 15, 2010, 09:10:12 AM
Need some help:
I've got a Mortal Kombat 1 pcb yesterday with some sound issues, it has only a continous, disturbing beep and no other sounds.As I can see, there is sound potmeter hacked to one of the connectors, maybe that's the problem.If anybody have the same board, pics would be great. ;)
(http://lh4.ggpht.com/_-UA8BV99Des/TD6whTRA0WI/AAAAAAAABYY/bgBB4H9NOrY/s640/Mortal%20001.jpg)

(http://lh5.ggpht.com/_-UA8BV99Des/TD6whqqMJ9I/AAAAAAAABYc/iNcmfGWKeZ8/s640/Mortal%20003.jpg)

Thanks in advance! :D
Title: Re: Mortal Kombat sound issues
Post by: kroustibat on July 15, 2010, 10:35:02 AM
i thought mortal kombat 1 got a separate pcb for sound
Title: Re: Mortal Kombat sound issues
Post by: Reinhold on July 15, 2010, 10:40:22 AM
i thought mortal kombat 1 got a separate pcb for sound

The PCB on the pictures is the Sound PCB...  :)
Title: Re: Mortal Kombat sound issues
Post by: kroustibat on July 15, 2010, 11:33:40 AM
my bad , apologize ::)
Title: Re: Mortal Kombat sound issues
Post by: Belike on July 15, 2010, 11:58:19 AM
i thought mortal kombat 1 got a separate pcb for sound
i thought mortal kombat 1 got a separate pcb for sound

The PCB on the pictures is the Sound PCB...  :)
Yes the pic is from the sound board only, it's connected to the mainboard.
Title: Re: Mortal Kombat sound issues
Post by: Laschek on July 15, 2010, 09:17:11 PM
This actually is the right spot for the sound pot, though not very elegantly done. My boardset uses a 47 Ohm or 47 kOhm pot, can't remember which, but it should be stated in the manual I guess.
Title: Re: Mortal Kombat sound issues
Post by: level42 on July 16, 2010, 07:13:20 PM
Operator hacks keep amazing me :)

I doubt the cause will be the pot.